全自動攪拌車的攪拌罐無疑是主要的組成部分，它關系到全自動攪拌車價格、功能及車主的運營的效益等多方面，攪拌車的攪拌容積大小更是不可忽視的因素，選用何種容積比較好呢？下面先來了解下“容積”的信息。

Undoubtedly, the mixing tank of the fully automatic mixer is the main component, which is related to the price, function, operation benefit of the owner and other aspects of the fully automatic mixer. The mixing volume of the mixer is a factor that cannot be ignored. What volume is better to choose? Now let's learn about the "volume".

攪拌車幾何容積：攪拌桶內實際的幾何容積，是指攪拌罐設計時，用數學方法計算出來的幾何容積。

Geometric volume of mixer truck: the actual geometric volume in the mixing drum refers to the geometric volume calculated by mathematical method during the design of the mixing tank.

攪拌容積：攪拌車能夠運輸的預拌混凝土量（以搗實后的體積計）?？梢钥闯蓴嚢柢嚨竭_工程現場所能夠卸下的混凝土方量預拌混凝土容量按2400kg/m3計算。

Mixing volume: the volume of ready mixed concrete that can be transported by the mixer truck (measured by the volume after tamping). It can be seen that the volume of ready mixed concrete that can be unloaded by the mixer truck when it arrives at the project site is calculated as 2400kg/m3.

攪拌車容積：攪拌車置于水平位置，攪拌桶能容納大的未經攪拌的混凝土物料（包括水），并能攪拌出運至混凝土的量（以搗實后的體積計）。

Volume of mixer truck: the mixer truck is placed in a horizontal position, and the mixing bucket can hold large unmixed concrete materials (including water), and can mix the amount of concrete transported to the concrete (measured by the volume after tamping).

三者的關系應該是：攪拌車幾何容積＞攪拌容積＞攪拌動容積，用戶經常所說的容積應該是指攪動容積，所以在現購攪拌車時，要注意區分問清車輛的攪拌容積。

The relationship between the three should be: the geometric volume of the mixer truck>the mixing volume>the stirring dynamic volume. The volume often mentioned by users should refer to the stirring volume. Therefore, when purchasing the mixer truck, pay attention to distinguish the mixing volume of the vehicle.

有效容積的算法跟罐體的傾角有關。一般傾角在12度、13度,填充率在63%左右。有效容積=幾何容積X填充率。所以算有效容積得先看攪拌車的傾角。但是生產出來的十方攪拌車，生產的時候容積都有余量的,說的是10方,實際容積在10.5左右，但是實際裝載的時候卻要留有余量一般裝載9方多一點。

The algorithm of effective volume is related to the inclination of tank body. Generally, the dip angle is 12 ° and 13 °, and the filling rate is about 63%. Effective volume=geometric volume X filling rate. Therefore, to calculate the effective volume, the angle of inclination of the mixer truck must be considered first. However, the volume of the ten square agitator truck produced has a margin during production, which is 10 square meters, and the actual volume is about 10.5. However, the actual loading requires a margin of more than 9 square meters.

全自動攪拌車攪拌罐的相關容積介紹就到這里了，希望能夠給您有效的幫助，當然您有不懂的地方或者遇到疑惑或者有什么采購需求，都可以隨時來我們網站http://www.www.boy7up.cn進行咨詢！

That's all for the introduction of the relevant volume of the mixing tank of the automatic mixer truck. I hope it can help you effectively. Of course, if you have any questions or purchase needs, you can come to our website at any time http://www.www.boy7up.cn Consult!