在
自上料攪拌車的選擇上,配置、動力、顏值、售后服務等是車主們需要綜合考慮的問題。但是有些細節常常被車主們忽略,這些細節對自上料攪拌車有著重要的影響。
In the selection of self loading mixer, configuration, power, appearance, after-sales service, etc. are the issues that the owners need to consider comprehensively. However, some details are often ignored by the car owners, which have an important impact on the self loading mixer.
車輛的安全性和便捷性離不開車身和車架的設計,作為能裝載的自上料攪拌車,車架的承載力是不容忽視的。
The safety and convenience of the vehicle can not be separated from the design of the body and frame. As a self loading mixer that can be loaded, the bearing capacity of the frame can not be ignored.
1.非承載式車身在遇到崎嶇路面的時候,剛性強的底盤大梁可以很好地吸收和抵抗扭曲力,所以車身受到的影響會大大減??;
1. When the non load bearing body encounters rough roads, the chassis girder with strong rigidity can well absorb and resist the twisting force, so the impact on the body will be greatly reduced;
2.由于底盤大梁和車身是分離的,并且中間嵌有許多減震的材料,所以在路況較差的地段行駛的時候,異響較少;
2. Because the chassis crossbeam and the body are separated, and there are many damping materials embedded in the middle, there is less abnormal noise when driving in poor road conditions;
3.因為零部件都安裝在底盤大梁上,所以在需要更換或者維修的時候,會更加方便一些。
3. Because the parts are installed on the chassis girder, it will be more convenient to replace or repair them.

自上料攪拌車采用輕量化設計,不僅可以讓動力性和安全性大大提升,更能有效降低油耗。此外在選車過程中,選擇優良車架不僅可以增加載重量,還可以降低運輸頻次。
The self loading mixer adopts lightweight design, which can not only greatly improve the power and safety, but also effectively reduce fuel consumption. In addition, in the process of vehicle selection, selecting a good frame can not only increase the load, but also reduce the frequency of transportation.
對自上料攪拌車,很多車型都是運輸車型,如冷藏車,倉柵車,灑水車,抑塵車,售貨車,危險品運輸車等,所以大梁的承載力是非常重要的,在選擇自上料攪拌車時還是重點看看吧。
For self loading mixers, many models are transport vehicles, such as refrigerated trucks, warehouse racks, sprinklers, dust suppression vehicles, sales vehicles, dangerous goods transport vehicles, etc. Therefore, the bearing capacity of the girder is very important. When selecting self loading mixers, we should focus on it.
This is the end of the important details about the selection of the charging mixer. If you have any questions about this, please come to our website http://www.www.boy7up.cn Look!