小型攪拌車支承安全注意事項你知道包含哪些內容嗎？接下來我們從八個方面解釋一番，下面小編為您解答。

Do you know what the safety precautions for small mixer truck support include? Next, we will explain it from eight aspects. Here are some answers.

1、支承地上有必要是水平的。不然有必要做一個水平支承表面。不能支承在空穴上。

1. The supporting ground must be level. Otherwise, it is necessary to make a horizontal supporting surface. It cannot be supported on the cavity.

2、小型攪拌車有必要支承在堅實的地上上，若支腿大壓力大于地上許用壓力，有必要用支承板或輔佐方木來增大支承表面積。

2. It is necessary for a small mixer truck to be supported on a solid ground. If the large pressure of the outrigger is greater than the allowable pressure on the ground, it is necessary to increase the bearing surface area with a bearing plate or square timber.

3、小型攪拌車支承在坑、坡附近時，應保存滿足的安全距離。

3. When the small mixer truck is supported near the pit and slope, the safety distance shall be kept.

4、支承時，須確保整機處于水平狀況，整機前后左右水平大偏角不超越3度。

4. When supporting, ensure that the whole machine is horizontal, and the large horizontal deflection angle of the whole machine from front to back and from left to right does not exceed 3 degrees.

5、在打開或收攏支腿時，支腿旋轉的范圍內都是風險區域，人員在范圍內有可能被夾傷。

5. When the outrigger is opened or closed, the scope of outrigger rotation is the risk area, and personnel may be pinched within the scope.

6、支承時，一切支腿有必要彈性和打開到規則的方位(支腿與支耳上箭頭對齊，前支腿臂與前支腿伸出臂箭頭對齊)不然有傾翻的風險。

6. When supporting, it is necessary for all outriggers to be flexible and open to a regular position (the outrigger is aligned with the arrow on the lug, and the front outrigger arm is aligned with the arrow of the front outrigger extension arm), otherwise there is a risk of tipping.

7、有必要按要求支撐好支腿才干操作臂架，有必要將臂架收攏放于臂架主支撐上后才干收支腿。

7. It is necessary to support the outrigger as required before operating the boom, and it is necessary to retract the boom and place it on the main support of the boom before the outrigger can be loaded and unloaded.

8、出現穩定性下降的要素有必要當即收攏臂架，排除后從頭按要求支承，下降穩定性的要素包括雨、雪水或其它水源引起的地上條件改變支撐腿一側地上下沉支腿油缸有泄漏。

8. In case of stability decline, it is necessary to immediately retract the boom and support it from the beginning as required after elimination. The factors of stability decline include changes in ground conditions caused by rain, snow or other water sources. The oil cylinder of the ground sinking outrigger on one side of the support leg has leakage.

以上便是小型攪拌車制成安全注意事項，希望對您有所幫助，如果還有問題可以來電我們公司http://www.www.boy7up.cn，與您洽談。

The above are the safety precautions for making small mixer trucks. I hope it will be helpful to you. If you have any questions, you can call our company http://www.www.boy7up.cn , to negotiate with you.