<address id="913f9"></address>

      <noframes id="913f9"><form id="913f9"><th id="913f9"></th></form>

      <address id="913f9"><address id="913f9"><nobr id="913f9"></nobr></address></address>
      <address id="913f9"><form id="913f9"><nobr id="913f9"></nobr></form></address>

      <address id="913f9"><dfn id="913f9"><listing id="913f9"></listing></dfn></address>
        <address id="913f9"><listing id="913f9"><meter id="913f9"></meter></listing></address>
        <noframes id="913f9"><form id="913f9"><nobr id="913f9"></nobr></form>

        <address id="913f9"></address>

        全國咨詢熱線

        400-879-1999

        點擊撥打服務熱線:400-879-1999
        你所在位置: 首頁 >> 新聞中心 > 行業資訊

        行業資訊

        自動上料攪拌車液壓油箱排氣管需要掛水嗎?

        作者:http://www.www.boy7up.cn 時間:2022-10-28

        有很多愛干凈的司機,專門在液壓油箱底部掛一個塑料瓶,將油箱排氣管插進瓶子里,為的是將排氣時帶出的液壓油收集起來,避免流到車上弄臟車身。這個看起來很不錯的舉措卻給整個液壓系統的安全埋下了一個非常大的隱患。
        There are many clean drivers who hang a plastic bottle at the bottom of the hydraulic oil tank and insert the exhaust pipe of the oil tank into the bottle to collect the hydraulic oil that is carried out during the exhaust, so as to avoid polluting the vehicle body. This seemingly good move has buried a very big hidden danger for the safety of the entire hydraulic system.
        自動上料攪拌車排氣管會將油箱里的熱氣排出,在瓶子里凝結成水,平時沖洗水和雨水也會順著氣管流進瓶子里,油箱冷卻時會將水分通過排氣管倒吸進油箱。參進水分的液壓油很快就會變質,成為乳白色,通常被稱為油液乳化。
        The exhaust pipe of the automatic feeding mixer will discharge the hot gas in the tank and condense into water in the bottle. Usually, the washing water and rainwater will also flow into the bottle along the pipe. When the tank cools, the water will be sucked back into the tank through the exhaust pipe. The hydraulic oil containing water will soon deteriorate into milky white, which is usually called oil emulsion.
        乳化后的液壓油潤滑性能和壓縮性能會嚴重下降,引起一系列的問題,輕則泵馬達內泄工作無力,各膠圈和油封磨損漏油。泵軸端油封漏油,控制閥膠圈磨損漏油,重則會使液壓泵和馬達柱塞滑靴和配油盤磨損甚至報廢。
        The lubricating performance and compression performance of the emulsified hydraulic oil will seriously decline, causing a series of problems, ranging from weak internal leakage of the pump, wear and leakage of rubber rings and oil seals. The oil seal at the pump shaft end leaks oil, the rubber ring of the control valve is worn and leaks oil, and the hydraulic pump and motor plunger slipper and oil distribution plate will be worn or even scrapped.
        自動上料攪拌車
        自動上料攪拌車泵內部嚴重磨損更好的解決辦法就是將排氣管垂直伸到車底下,讓排出的油自然滴到地上。不要將排氣管打結和纏繞。
        A better solution to the severe wear inside the pump of the automatic feeding mixer is to extend the exhaust pipe vertically under the truck, so that the discharged oil naturally drops to the ground. Do not knot and wind the exhaust pipe.
        好在現在的自動上料攪拌車散熱器都進行了改良,在油箱側面加裝了一個油液回收盒,可以有效解決污染的問題,盒子容量有限,大伙可要記得經常檢擦,及時將里面積存的油放掉,尤其是新車剛使用和換完油后的幾天是更容易溢油的。
        Fortunately, the radiator of the current automatic feeding mixer has been improved. An oil recovery box has been installed on the side of the fuel tank, which can effectively solve the problem of pollution. The box capacity is limited. You should remember to check and wipe it frequently, and drain the oil accumulated in it in time. Especially in new vehicles, it is easier to spill oil a few days after use and oil change.
        自動上料攪拌車液壓油箱排氣管需要掛水嗎?所以從以上內容中我們可以知道答案是不需求的,希望所講給你好的幫助,您可以來我們這里http://www.www.boy7up.cn做更多事項咨詢!
        Does the exhaust pipe of the hydraulic oil tank of the automatic feeding mixer need to hang water? So we can know from the above that the answer is not required. I hope you can come here to help us http://www.www.boy7up.cn Do more consultation!
        新聞中心
        聯系我們
        • 公司:萊州聚峰機械有限公司
        • 熱線:400-879-1999
        • 地址:山東省萊州市206國道與308省道交叉口東南50米

        截屏,微信識別二維碼

        国语对白在线视频