自上料攪拌車的使用時間過長非常容易就會出現問題,所以需要固定時期內去進行維修,那么您知道在維修中要注意什么事情嗎?
If the self feeding mixer is used for too long, it is very easy to have problems, so it needs to be repaired within a fixed period of time. Do you know what to pay attention to in the maintenance?
在初次使用到50小時時,要及時檢查罐體及其他部位螺栓是否有松動,每天行車前要檢查托輪與滾道的潤滑,每個月打開一次托輪護罩,清理內部的油污并添加潤滑油脂。
When the first use lasts for 50 hours, timely check whether the bolts on the tank body and other parts are loose. Before driving every day, check the lubrication of the supporting wheel and raceway. Open the supporting wheel shield once a month, clean the internal oil stain and add lubricating grease.
自上料攪拌車設備在長時間的使用中難免會存在一定的故障問題,為了避免設備在使用中的良好性能,就需要我們對設備進行合理的維修才行。
It is inevitable that the self feeding mixer equipment will have some problems in the long-term use. In order to avoid the good performance of the equipment in use, we need to carry out reasonable maintenance on the equipment.
液壓系統是攪拌車的核心系統。為保證攪拌車能正常工作,攪拌罐能運轉正常,須在每次車輛發動前檢查油路散熱器和減速機的液壓油位,保證油位指示在視窗范圍內。同時要保證它的清潔,不能讓灰塵等污染系統液壓油,造成系統不能正常工作或損壞。
Hydraulic system is the core system of mixer truck. In order to ensure that the mixer truck can work normally and the mixing tank can operate normally, the hydraulic oil level of the oil radiator and reducer must be checked each time before the vehicle is started to ensure that the oil level indication is within the scope of the window. At the same time, ensure that it is clean, and do not allow dust and other pollutants to pollute the hydraulic oil of the system, causing the system to not work normally or be damaged.

氣壓供水系統加水量好在水箱的四分之三處,經常檢查閥體是否堵塞或是否有工作異常。在有結冰可能的環境中使用時,供水系統須排空存水,防止管路凍裂。
The amount of water added to the pneumatic water supply system is good at three quarters of the water tank. Check the valve body frequently for blockage or abnormal operation. When the water supply system is used in an environment with the possibility of icing, the water storage must be drained to prevent the pipeline from freezing.
不能夠給自上料攪拌車的輪胎栓螺母涂油,不少司機認為給輪胎栓螺母涂潤滑油能夠避免螺栓螺母生銹,事實上,這種做法是非常危險的,因為它會給攪拌車行車帶來隱患。
It is not allowed to oil the tire bolts and nuts of the self loading mixer. Many drivers think that coating the tire bolts and nuts with lubricating oil can prevent the bolts and nuts from rusting. In fact, this practice is very dangerous, because it will bring hidden dangers to the driving of the mixer.
螺栓和螺母擰緊之后本身是有自鎖特點的,而潤滑油則會讓自鎖系數下降。攪拌罐運作過程中,螺栓螺母一旦松動就會產生事故。
Bolts and nuts have self-locking characteristics after being tightened, while lubricating oil will reduce the self-locking coefficient. During the operation of the mixing tank, once the bolts and nuts are loosened, accidents will occur.
The matters needing attention in the maintenance of the self feeding mixer truck are just some of the contents explained above http://www.www.boy7up.cn Learn by yourself in use!