1. Check the supporting wheel and motor of the mixing drum to see if there are earth and stone debris stuck. If so, clean the debris.

2如果不是由于雜物卡住無法轉動，立刻呼叫救援車。

2 if it is not due to sundries stuck and unable to rotate, call the rescue vehicle immediately.

3在有條件排放混凝土的情況下，可以將馬達上的高壓軟管的管接頭卸下，旋轉攪拌筒，讓攪拌筒檢修孔向下，將混凝土從檢修孔排出。

3. If it is possible to discharge the concrete, remove the pipe joint of the high-pressure hose on the motor, rotate the mixing drum, make the mixing drum manhole downward, and discharge the concrete from the manhole.

4救援車到場后，將故障車馬達上的高壓軟管卸下，接上救援用高壓軟管，另一端接在救援車油泵上，同時把應急用的回油管連接在故障車馬達泄油口位置，另一端連接在救援車油泵回油口，利用救援車對故障車的攪拌車進行控制旋轉，直至混凝土排出。

4 after the rescue vehicle arrives at the site, remove the high-pressure hose on the motor of the failed vehicle, connect the high-pressure hose for rescue, connect the other end to the oil pump of the rescue vehicle, connect the emergency oil return pipe to the oil drain port of the motor of the failed vehicle, and connect the other end to the oil return port of the oil pump of the rescue vehicle, and use the rescue vehicle to control the rotation of the mixer of the failed vehicle until the concrete is discharged.

5如有條件的情況下，可以直接更換出現故障的馬達，更換馬達后接好各個油管，攪拌筒即可正常旋轉。

5 if conditions permit, the faulty motor can be directly replaced. After replacing the motor, connect each oil pipe, and the mixing drum can rotate normally.

出現攪拌筒停轉故障的情況下，如何避免混凝土凝固或者悶罐是首先要考慮的問題，所以處理該故障時一定要果斷、快速，避免拖延時間導致損失加劇。

When the mixing drum stops running, how to avoid concrete solidification or tank stuffing is the first problem to be considered. Therefore, when dealing with the fault, we must be decisive and fast to avoid aggravating the loss caused by delay.

本文的內容是由全自動攪拌車給您提供，我們專注客戶需求，不斷的發展，為客戶提供更多的服務，詳情可參考我們的網站：http://www.www.boy7up.cn

The content of this article is provided to you by the automatic mixer truck. We focus on customer needs, continue to develop and provide customers with more services. For details, please refer to our website: http://www.www.boy7up.cn