小型攪拌車應該非常的廣泛,保證它能正常工作,那就注重攪拌車的日常維護。我們在這里講講小型攪拌車的安裝緊固和清潔。
Small mixers should be very extensive to ensure that they can work normally. Pay attention to the daily maintenance of mixers. Here we will talk about the installation, fastening and cleaning of small mixer trucks.
1.主機機身和支架,上料支架和其他設施的安裝和連接要牢固,各緊固件要完整、齊全和牢固;
1. The main machine body and support, loading support and other facilities shall be firmly installed and connected, and all fasteners shall be complete, complete and firm;
2.清理攪拌筒體內外、卸料門、上料架和底盤上的積料,并用水沖洗干凈。保持機身、場地和操作室清潔,無雜亂物品堆放;
2. Clean up the accumulated materials inside and outside the mixing cylinder, on the discharge gate, loading rack and chassis, and flush them with water. Keep the machine body, site and operation room clean and free of clutter;
3.地基周圍不得積水,冰凍季節應將供水系統的存水全部排盡。
3. There shall be no ponding around the foundation, and all the water stored in the water supply system shall be drained in the freezing season.
4.震動部件和與之連接部分的緊固。
4. Fastening of vibrating parts and connecting parts.
5.有的機構,如行程開關、電池閥等,可根據情況定期檢查調整和清洗。
5. Some mechanisms, such as travel switch and battery valve, can be checked, adjusted and cleaned regularly according to the situation.

由于攪拌車的整體結構各不相同和攪拌車型號不同結構不同,這里只作一般性的說明,特別的部分需要遵照說明書進行維護。
Since the overall structure of the mixer truck is different and the mixer model number is different, only general instructions are given here, and special parts need to be maintained according to the instructions.
需要特別指出的是,攪拌車的防塵特別重要,塵土的堆積給攪拌車的維護和維修帶來很大的不便,使所有設備的性能下降,壽命縮短,潤滑受到損害,因此應從結構和原理上面使塵土產生量小,并定期進行清理和維護。
It should be pointed out that the dust prevention of the mixer is particularly important. The accumulation of dust brings great inconvenience to the maintenance and repair of the mixer, which reduces the performance of all equipment, shortens the service life, and damages the lubrication. Therefore, the amount of dust generated should be small from the structure and principle, and regular cleaning and maintenance should be carried out.
This is the end of the installation, fastening and cleaning of small mixer trucks. However, they should be operated in a correct way to operate smoothly. Follow us http://www.www.boy7up.cn , understand the matter!