1. The turbocharger is damaged. If the impeller shaft of the turbocharger moves, the oil in the tank is basically damaged. In addition, pipes should be inspected. Press the air pump to check whether the compressor rubber button and the foam water outlet pipe leak.

2、從加料攪拌機檢查中冷器是否損壞。用同樣的方法給氣泵加壓，仔細檢查水箱前中冷器是否漏氣，調整閥門，并定期找技術人員根據車輛公里數調整氣門間隙。

2. Check the intercooler for damage from the charging mixer. Use the same method to pressurize the air pump, carefully check whether the intercooler in front of the water tank leaks, adjust the valve, and regularly find the technician to adjust the valve clearance according to the vehicle kilometers.

3、如果尿素噴嘴不符合標準，有必要特意更換尿素噴嘴。如果不合格，駕駛員不得故意更換尿素噴嘴。如果不合格，駕駛員不應直接更換尿素噴嘴。如果不合格，駕駛員不得更換尿素噴嘴。

3. If the urea nozzle does not meet the standard, it is necessary to replace the urea nozzle specially. If not, the driver shall not change the urea nozzle intentionally. If not, the driver should not replace the urea nozzle directly. If not, the driver shall not replace the urea nozzle.

4、從充注混合器校準噴油器。不要加便宜的柴油。如果噴油器損壞了，省下來的錢就不夠你換噴嘴了。

4. Calibrate the injector from the charging mixer. Don't add cheap diesel. If the injector is damaged, the money saved will not be enough for you to change the nozzle.

5、由于裝料攪拌機掛檔，之前推不到位，拉不到底。有很多車輛的齒輪很重，而且沒有到位。通常有一個原因：變速桿或球頭磨損。從齒輪下部到齒輪箱頂部有許多球頭。由于車輛在行駛過程中需要不斷變換檔位，球頭容易磨損，移動時應及時更換；現在，很多專用車都采用了變速器拉索設計。如果電纜長時間使用，會刺穿并變長，從而導致換檔困難甚至無法掛檔。如果調整了變速桿底座上的螺釘，無論變速桿位于駕駛室還是發動機上，都會有固定螺釘。如果底座松動，如果上蓋端蓋的花鍵套或花鍵軸磨損嚴重，將很難換檔，直接導致換檔困難甚至失敗。

5. As the charging mixer is in gear, it can't be pushed in place and pulled to the end. There are many vehicles with heavy gears that are not in place. There is usually one reason: the gear lever or ball head is worn. There are many ball heads from the bottom of the gear to the top of the gearbox. As the vehicle needs to change gears constantly in the process of driving, the ball head is easy to wear and tear, so it should be replaced in time when moving; Now, many special vehicles have adopted the transmission cable design. If the cable is used for a long time, it will pierce and become longer, resulting in difficult shift or even unable to shift. If the screw on the base of the shift lever is adjusted, there will be a set screw whether the shift lever is located in the cab or on the engine. If the base is loose, if the spline sleeve or spline shaft of the upper cover end cover is seriously worn, it will be difficult to shift, which directly leads to the difficulty or even failure of shifting.

6、檢查電磁閥。如果小齒輪箱蓋開關電磁閥的套管損壞，也會造成換檔困難。混凝土攪拌車車身相對較重，只要你掌握駕駛方法，對變速箱有足夠的了解，對你來說不是很困難。

6. Check the solenoid valve. If the sleeve of the switch solenoid valve of the pinion cover is damaged, it will also cause difficulty in shifting. The body of concrete mixer is relatively heavy. As long as you master the driving method and know enough about the gearbox, it is not very difficult for you.

本文來自：自上料攪拌車更多的內容請點擊：http://www.www.boy7up.cn我們將會為您提問的問題提供一個滿意的服務，歡迎您的來電！

This article is from: self feeding mixer. For more information, please click: http://www.www.boy7up.cn We will provide a satisfactory service for your questions, welcome your call!