由于混凝土會在短時間內凝固成硬塊，且對鋼材和油漆有一定的腐蝕性，所以每次使用混凝土貯罐后，洗凈粘附在混凝土貯罐及進出料口上的混凝土是每日維護要認真進行的工作。其中自上料攪拌車清洗包括：

Because the concrete will solidify into hard blocks in a short time and have certain corrosivity to steel and paint, it is a serious work to clean the concrete adhered to the concrete storage tank and the inlet and outlet after each use of the concrete storage tank. The cleaning of self-feeding mixer includes:

1．每次裝料前用水沖洗進料口，使進料口在裝料時保持濕潤；

1. Flush the feed inlet with water before each loading to keep the feed inlet wet during loading;

2．在裝料的同時向隨車自帶的清洗用水水箱中注滿水；

2. Fill the washing water tank with water when loading;

3．裝料后沖洗進料口，洗凈進料口附近殘留的混凝土；

3. Flush the feed inlet after loading and clean the residual concrete near the feed inlet;

4．到工地卸料后，沖洗出料槽，然后向混凝土貯罐內加清洗用水30—40L；在車輛回程時保持混凝土貯罐正向慢速轉動；

4. After unloading at the site, flush the discharge tank, and then add 30-40L of cleaning water to the concrete storage tank; Keep the concrete storage tank rotating slowly in the forward direction when the vehicle returns;

5．下次裝料前切記放掉混凝土貯罐內的污水；

5. Remember to drain the sewage in the concrete storage tank before the next loading;

6．每天收工時要清洗混凝土貯罐及進出料口周圍，保證不粘有水泥及混凝土結塊。

6. At the end of each day, the concrete storage tank and the surrounding of the inlet and outlet shall be cleaned to ensure that there is no cement and concrete caking.

自上料攪拌車廠家提醒，以上這些工作只要一次不認真進行，就會給以后的工作帶來很大的麻煩。更多相關攪拌車的事項就來我們網站http://www.www.boy7up.cn進行咨詢了解吧！

The manufacturer of the self-feeding mixing truck reminded that if the above work is not carried out carefully once, it will bring great trouble to the future work. For more matters related to the mixer, please visit our website http://www.www.boy7up.cn Consult and understand!