1、正確把握全自動攪拌車變速箱的油的使用周期，定期更換。

1. Correctly grasp the service cycle of the oil in the gearbox of the automatic mixer truck and replace it regularly.

一般多數廠家會建議變速箱換油周期通常為兩年或4~6萬公里。車主朋友們在使用車輛時要保持變速箱油清潔，因為變速箱油運用時間長了以后會發生油垢，有可能會構成油泥，會加大各摩擦片和各部件的磨損，還會使各閥體中閥體的移動不暢，油壓操控受影響，從而使全自動攪拌車變速箱出現異常。

Generally, most manufacturers will recommend that the oil change interval of transmission is usually two years or 40000~60000 kilometers. Owners and friends should keep the gearbox oil clean when using the vehicle, because the gearbox oil will produce oil dirt after being used for a long time, which may form oil sludge, increase the wear of various friction plates and components, and also make the movement of valve bodies in each valve body not smooth, and the oil pressure control is affected, thus making the gearbox of the automatic mixer abnormal.

2、經常查看變速箱油液位是不是正常。

2. Always check whether the transmission oil level is normal.

查看變速箱油液需要將油預熱到50℃左右，再將擋位桿在各擋位逗留2秒鐘后置于泊車擋，此刻油尺正常油面應坐落高與低線之間，如未達到，應及時增加一樣質量的油品。

To check the transmission oil, it is necessary to preheat the oil to about 50 ℃, and then put the gear lever in each gear for 2 seconds, and then put it in the parking gear. At this moment, the normal oil level of the dipstick should be between the high and low lines. If it is not reached, the same quality oil should be added in time.

3、正確更換變速箱油。

3. Change the transmission oil correctly.

動態換油是目前比較提倡的換油方法，選用專用的變速箱清潔設備，在變速箱工作的過程中，將舊油充沛循環，排放潔凈后再參加新的變速箱油，從而使換油率高達90以上，確保高能效換油。

Dynamic oil change is a relatively recommended oil change method at present. Special gear box cleaning equipment is selected. During the operation of the gear box, the old oil is fully circulated, and then the new gear box oil is added after the discharge is clean, so that the oil change rate can reach more than 90, and the high-efficient oil change can be ensured.

4、不要隨便拆卸變速箱。

4. Do not disassemble the transmission randomly.

變速箱在裝配的時候，是廠家經過精密調配的，包括每一個螺絲的位置和松緊度都是有技術參數的，如果我們手工拆卸以后，很難裝回原來的位置，這勢必會加重變速箱額磨損。需要維修變速箱一定要到底盤廠家的維修服務站中，由專門的維修人員進行操作。

When assembling the gearbox, the manufacturer has carefully adjusted it, including the position and tightness of each screw with technical parameters. If we disassemble it manually, it is difficult to install it back to its original position, which will inevitably aggravate the wear of the gearbox. The gearbox must be repaired at the maintenance service station of the chassis manufacturer and operated by special maintenance personnel.

全自動攪拌車變速箱的4個養護方法相關內容就講解到這里了，您對此有怎樣的疑惑或者需求，就來我們網站http://www.www.boy7up.cn咨詢吧！

The relevant contents of the four maintenance methods for the gearbox of the automatic mixer are explained here. If you have any doubts or needs about this, please come to our website http://www.www.boy7up.cn Ask!