小型攪拌車卸料環節其實對于工程的建設進程是很重要的，卸料慢的話會浪費很多的時間，當然使用正確的操作就會讓人員安全，讓卸料過程加快，下面來講講小型攪拌車駕駛進工地及卸料后的事項。

In fact, the unloading link of the small mixer is very important for the construction process of the project. Slow unloading will waste a lot of time. Of course, the correct operation will make personnel safe and speed up the unloading process. Next, we will talk about the driving of the small mixer into the construction site and the matters after unloading.

進工地

Entering the construction site

進工地時盡量走路中間，因工地道路簡易，路基松軟，靠近路邊行車容易導致車輛側翻。

When entering the construction site, try to walk in the middle. Because the road on the construction site is simple and the subgrade is soft, driving near the roadside is easy to cause vehicle rollover.

提前下車查看倒車線路。攪拌車晚上工作，到工地后，將車停好，先下車查看倒車路線，有障礙物、有坑或者比較松軟的地方，都要避讓，遇到鋼筋釘子之類的及時清理。

Get out of the car in advance to check the reversing route. The mixer truck works at night. After arriving at the construction site, park the truck and get off to check the reversing route. If there are obstacles, pits or soft places, avoid them. In case of reinforcement nails, clean them in time.

在倒車的時候一定要慢。因工地好多路面是挖掘機剛剛鋪的比較軟，車容易陷。

Be slow when reversing. Because many roads on the construction site are just paved by excavators, which is relatively soft, the car is easy to sink.

用1檔起步(這時候可以把罐子停下，一檔大油門時罐子會轉得很快，車子會更不穩定)，緩慢而勻速的行駛。倒車路線盡量直線，若要反復倒車時，方向盤不要打死或打太過，因為在松軟路面容易憋熄火，轟大油門倒出時，車速過快，容易撞到東西。

Start with the first gear (you can stop the tank at this time, the tank will rotate very fast when the first gear is full throttle, and the car will be more unstable), and drive slowly and at a constant speed. The reversing route should be as straight as possible. If you want to reverse repeatedly, the steering wheel should not be killed or turned too far, because it is easy to hold the engine off on soft roads. When the accelerator is turned up, the vehicle speed is too fast and it is easy to hit things.

卸料中

Unloading

卸料前讓攪拌罐全速運轉攪拌一兩分鐘，讓混凝土充分攪拌，必要時可以加一些水，讓混凝土攪拌得更均勻，也方便卸料。卸料不要大意和放料工確定好關系，放料時好自己看著，免得放料工亂操作放料操作桿。每次罐子正反轉中間位子時好停一下，保護減速機、泵馬達等。

Before unloading, let the mixing tank run at full speed and mix for a minute or two to fully mix the concrete. If necessary, add some water to make the concrete mix more evenly and facilitate unloading. Don't carelessly determine a good relationship with the placer when discharging materials, and watch yourself when discharging materials, so as to prevent the placer from randomly operating the discharging lever. Stop every time the tank is in the middle of the forward and reverse direction to protect the reducer, pump motor, etc.

攪拌罐一定要仔細沖洗干凈，洗罐子時一定要仔細沖洗干凈，并把水反復正反轉兩次，再放出來。別忘了施工單位簽字，把到工地時間和自己的大名簽上，別忘了施工單位簽字，否則白干了。

The mixing tank must be carefully washed. When washing the tank, it must be carefully washed. The water must be reversed twice and then released. Don't forget the signature of the construction unit. Sign the time of arrival at the construction site and your name. Don't forget the signature of the construction unit, or you will work for nothing.

小型攪拌車駕駛進工地及卸料后的正確操作就講解到這里了，您對此有什么疑惑或者對攪拌車有需求，歡迎隨時來我們網站http://www.www.boy7up.cn進行聯系咨詢了解！

The correct operation of the small mixer after driving into the construction site and unloading will be explained here. If you have any doubts or needs for the mixer, please come to our website at any time http://www.www.boy7up.cn Contact and inquire!