Oxidation of paint surface

在太陽紫外線的強烈照射下，小型攪拌車的車膜會不斷蒸發油分來保護自身，時間久了會導致漆面油分過度散失，在空氣中形成氧化層，影響漆面的亮度和光澤度。此時可明顯觀察到車漆發烏、發白、缺少光澤等現象，如果比較嚴重，可以通過研磨和拋光的方法進行處理。

Under the strong ultraviolet radiation of the sun, the film of the small mixer will continue to evaporate oil to protect itself. After a long time, it will cause excessive loss of paint oil, form an oxide layer in the air, and affect the brightness and gloss of the paint. At this time, it can be observed that the car paint is black, white and lack of luster. If it is serious, it can be treated by grinding and polishing.

二交通膜

Two traffic membranes

攪拌車在工作過程中容易因為摩擦產生靜電，吸附大量的灰塵和油污。長期會在表面形成一層堅固的“交通膜”，導致漆面被氧化腐蝕，對車輛進行研磨拋光可以有效解決這種情況。

Mixing truck is easy to generate static electricity due to friction in the process of working, which can absorb a lot of dust and oil. A strong "traffic film" will be formed on the surface for a long time, which will lead to the oxidation and corrosion of the paint surface. Grinding and polishing of vehicles can effectively solve this problem.

三龜裂

Three cracks

有些車主常常忽視漆面護理，攪拌車的工作環境比較特殊，金屬漆可能產生一些細微的裂痕，它會不斷地向下滲透，嚴重時會穿透整個色漆層。重噴漆的質量不好也可能產生這種問題。如果車主發現車身有龜裂的現象，建議經常打蠟，做好護理。

Some car owners often ignore the paint care. The working environment of the mixer is special. The metal paint may have some tiny cracks, which will continue to penetrate downward. In serious cases, it will penetrate the whole paint layer. Poor quality of repainting can also cause this problem. If the car owner finds that the car body is cracked, it is recommended to wax it regularly and take good care of it.

四褪色

Four color fading

空氣中的污染是導致車漆褪色的主要原因。褪色與氧化的區別在于，車漆褪色會在車身形成不均勻的色差。如果程度較輕，可進行簡單的研磨、拋光處理；如果褪色嚴重，必須重新噴漆。

Pollution in the air is the main cause of paint discoloration. The difference between discoloration and oxidation is that discoloration of car paint will cause uneven color difference in the car body. If the degree is light, simple grinding and polishing can be carried out; If the discoloration is serious, it must be repainted.

五車身痕跡

V. body marks

鳥糞、焦油等引起的輕微蝕痕可研磨拋光處理；氧化、長期使用化學劑形成的水痕可通過打蠟拋光進行處理，嚴重時需要重新噴漆；因摩擦導致的細微劃痕一般采用專業的拋光方法去除。

Slight erosion marks caused by bird manure, tar, etc. can be ground and polished; The water mark formed by oxidation and long-term use of chemical agent can be treated by waxing and polishing, and it needs to be repainted when it is serious; Fine scratches caused by friction are usually removed by professional polishing methods.

今天的小型攪拌車精彩內容就給大家分享到這了，更多的精彩內容請點擊我們的網站http://www.www.boy7up.cn進行關注留言，后續會有更多的精彩內容為您呈現.

Today's small mixer wonderful content to share with you, more wonderful content please click on our website http://www.www.boy7up.cn Follow the message, there will be more wonderful content for you