小型攪拌車運輸混凝土的方式一般是根據運輸距離的遠近,施工條件和對混凝土的配比及質量的要求來定的。
The mode of transporting concrete by small mixers is generally determined according to the distance of transportation, construction conditions and requirements for the proportion and quality of concrete.
可以運輸預拌的混凝土,就是已經攪拌好的混凝土,這種運輸方式一般路程不會太遠,攪拌車從攪拌站裝好混凝土,在行駛過程中攪拌罐以2r/min左右的轉速進行轉動,以保證混凝土不會出現凝結,離析的現象,同時也能保證混凝土的質量。
The ready-mixed concrete can be transported, that is, the concrete that has been mixed. This transportation method is generally not too far away. The mixer truck loads the concrete from the mixing station, and the mixing tank rotates at a speed of about 2 r/min during the driving process to ensure that the concrete will not coagulate and segregate, and also ensure the quality of the concrete.
其次可以運輸合料運輸,這個合料運輸主要是指濕料和干料的運輸。
Secondly, we can transport mixed materials, which mainly refers to the transportation of wet materials and dry materials.
濕料運輸:攪拌站將水泥、砂石骨料、水等按科學的配比同時裝入攪拌車的攪拌罐,在運輸的過程中攪拌罐會以10r/min左右的轉速轉動,讓混凝土在車輛的行駛過程中充分攪拌均勻,到達建筑工地后,混凝土基本上就攪拌好了。
Wet material transportation: the mixing station will load the cement, gravel aggregate, water, etc. into the mixing tank of the mixing truck at the same time according to the scientific proportion. During the transportation, the mixing tank will rotate at a speed of about 10r/min, so that the concrete can be fully mixed evenly during the driving process of the vehicle. After arriving at the construction site, the concrete is basically mixed.

干料運輸:這種運輸方式就是在攪拌站按混凝土按配比向攪拌罐內加入水泥、砂石等干料,再向攪拌車的壓力水箱中加入攪拌用水,然后在攪拌車的行駛過程中適當的攪拌罐內噴水進行攪拌,還可以根據建筑工地的要求運輸干料到現場后再注水進行攪拌。
Dry material transportation: This transportation method is to add cement, sand and other dry materials into the mixing tank according to the proportion of concrete in the mixing station, then add mixing water into the pressure tank of the mixing truck, and then spray water into the mixing tank during the driving process of the mixing truck for mixing, or transport dry materials to the site according to the requirements of the construction site and then inject water for mixing.
能夠延長混凝土的輸送距離,尤其是混凝土干料注水的方式可以將混凝土運輸到很遠的地方;濕料攪拌運輸可以節約攪拌設備投資,這樣就相對的提高了生產效率。
It can extend the delivery distance of concrete, especially the concrete can be transported to far places by means of water injection with dry materials; The wet material mixing and transportation can save the investment of mixing equipment, thus relatively improving the production efficiency.
No matter what kind of transportation mode the mixer uses, there are both advantages and disadvantages. This is mainly determined according to the actual situation. The appropriate transportation mode is important. Come to our website if you have any questions http://www.www.boy7up.cn Consult!