為了確保施工質量，提高小型攪拌車的工作效率，在攪拌車開動前就需把準備工作做好，究竟需做好哪些準備工作？接下來小編就給大家論述一下。

In order to ensure the construction quality and improve the work efficiency of the small mixer, the preparations should be done before the mixer starts. What preparations should be done? Next, Xiaobian will discuss it for you.

1、把施工現場清理干凈，不能有矸石及雜物出現;

1. Clean up the construction site without gangue and sundries;

2、將攪拌車安放穩當，接好風、水管路、輸料管，各管路排布要平直，不得有急彎，接頭要嚴密，不得漏風;

2. Place the mixer truck firmly, connect the air, water and material pipes, and the arrangement of each pipeline should be straight without sharp bends, and the joints should be tight without air leakage;

3、檢查攪拌車性能是否完好，各緊固件固定是否牢固，然后接通電源空載試運轉，檢查轉動是否正常;

3. Check whether the performance of the mixer truck is intact and whether the fasteners are fixed firmly, and then turn on the power for no-load test run to check whether the rotation is normal;

4、在施工面周邊設置施工范圍，在施工區域安設厚度標志;

4. Set up the construction range around the construction surface, and set up thickness signs in the construction area;

5、為攪拌車操作人員準備好勞保用品，施工過程中有哪些注意事項需提前交代好;

5. Prepare labor protection supplies for the mixer truck operators, and what precautions should be explained in advance during the construction process;

6、在施工范圍周邊拉上隔離帶，無關人員不得入內，確保施工后施工面不被破壞。

6. Set up isolation belt around the construction scope, and irrelevant personnel are not allowed to enter, so as to ensure that the construction surface is not damaged after construction.

此外大家在工作了一段時間之后，都會去選擇個地方度假。攪拌車作為當前常用的一款施工設備，在經歷了多次的施工后，它也是需要做保養的。經過養護的攪拌車，不僅能幫助提高施工效率，縮短施工周期，還能大大減少施工的人工成本，為了更加符合各類型隧道施工的實際工況，一直致力為客戶打造更好的機械產品。

In addition, after working for a period of time, everyone will choose a place for vacation. As a commonly used construction equipment, the mixer truck also needs maintenance after many times of construction. The cured mixer truck can not only help improve the construction efficiency and shorten the construction cycle, but also greatly reduce the labor cost of construction. In order to better meet the actual working conditions of various types of tunnel construction, it has been committed to creating better mechanical products for customers.

無論是生產企業還是使用者，普遍缺少防銹意識，更不要說掌握正確的防銹方法。攪拌車一般擺放在廠房空地上或者工地上，直接暴露在惡劣環境中，風吹日曬，雨露侵蝕，攪拌車內外部很快就會出現各種銹蝕。針對這種情況，要對攪拌車進行雜質清除，涂抹防銹由之后，利用防銹包裝紙或包裝膜進行纏繞包裝。

Both manufacturers and users generally lack the awareness of rust prevention, let alone master the correct rust prevention methods. The mixer truck is generally placed on the open space of the plant or on the construction site, which is directly exposed to the harsh environment, wind and sun, rain and dew erosion, and all kinds of rust will appear inside and outside the mixer truck soon. In view of this situation, it is necessary to remove impurities from the mixer truck, apply anti rust coating, and then wrap it with anti rust packaging paper or packaging film.

其次就是小型攪拌車出廠后需要運到全國各地銷售，而這個運輸過程也是容易銹蝕的環節。所以攪拌車在運輸過程中要采取適合的防銹包裝措施，就顯得尤為重要了。使用一種針對大型工程機械的包裝專門開發的包裝膜，柔韌性和密閉性非常好，遇熱以后會發生收縮，使包裝更加緊密，具有防水、防塵、防銹、防碰等功能，更重要的是成本較低，非常適合攪拌車的包裝。

The second is that small mixer trucks need to be transported to all parts of the country for sale after leaving the factory, and this transportation process is also a link that is easy to rust. Therefore, it is particularly important to take appropriate anti rust packaging measures during the transportation of mixer truck. A specially developed packaging film for the packaging of large-scale construction machinery is used, which has very good flexibility and tightness. It will shrink in case of heat, making the packaging more compact. It has the functions of waterproof, dustproof, rust proof, anti-collision and so on. More importantly, it has low cost, and is very suitable for the packaging of mixer trucks.

以上就是問題解答的相關內容了，希望能夠幫助到大家，如對這一問題還存在任何疑問，都歡迎關注我們網站http://www.www.boy7up.cn并咨詢我們的工作人員，將竭誠為您服務。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.www.boy7up.cn And consult our staff, will serve you wholeheartedly.