全自動攪拌車是一個大型施工設備，所以使用過程中是需要小心再小心的，但是仍舊避免不了交通事故的頻發，下面就讓全自動攪拌車廠家來講解其中的原因吧。

　　Automatic mixer is a large construction equipment, so it is necessary to be careful in the process of use, but still can not avoid frequent traffic accidents, let the automatic mixer manufacturer explain the reasons.

　　車輛因素

　　Vehicle factors

　　重載。攪拌車太大，制動時慣性力很大，制動距離必然會增加很多。

　　Overloading. Mixing car is too big, braking inertia force is very large, braking distance is bound to increase a lot.

　　自動上料攪拌車質心高。車身高度使自動上料攪拌車整車質心較高，行駛過程中極易發生翻車事故。

　　Automatic feeding agitator has a high center of mass. The height of the car body makes the vehicle centroid of automatic loading agitator higher, and it is easy to cause rollover accident during driving.

　　視線盲區大。自動上料攪拌車的駕駛室比較高，前保險杠、右門下方和車尾都是盲區。例如，行人或非機動車在盲區行駛時，自動上料攪拌車轉彎時容易發生刮傷事故。

　　Blind spots are large. The cab of the automatic feeding mixer is relatively high, and the front bumper, under the right door and the rear are blind spots. For example, when pedestrians or non-motor vehicles are driving in blind areas, automatic feeding mixer is prone to scratch accidents when turning.

　　產生偏壓力。自動上料攪拌車在運輸過程中應始終保持旋轉，使其質心沿旋轉方向偏移一定距離，導致自動上料攪拌車左右兩側輪載不同，導致一種偏置力。

　　Generate partial pressure. Automatic feeding agitator in the transportation process should always keep rotating, so that the center of mass along the direction of rotation offset a certain distance, resulting in the left and right sides of the automatic feeding agitator wheel load is different, resulting in a bias force.

　　全自動攪拌車廠家認為司機安全意識薄弱。駕駛員安全意識不足是交通事故頻發的主要原因。部分水泥自動上料攪拌車司機因交通法規觀念薄弱，安全意識不強，忽視交通安全，導致事故發生。

　　Drivers have poor safety awareness. Drivers' lack of safety awareness is the main cause of frequent traffic accidents. Some drivers of cement automatic mixing truck ignore traffic safety due to weak concept of traffic laws and regulations and weak safety awareness, resulting in accidents.

　　企業因素

　　Enterprise factors

　　目前，為了追求更大的利潤，很多水泥自動上料攪拌站都采用計件工資制。事實上，在自動上料攪拌車中安裝GPS的目的是時刻監控自動上料攪拌車的行駛速度，而自動上料攪拌站管理人員的管理在管理上存在問題。

　　At present, in order to pursue greater profits, many cement automatic material mixing station are using piece-rate wage system. In fact, the purpose of installing GPS in the automatic feeding mixing car is to monitor the speed of the automatic feeding mixing car at all times, and there are problems in the management of the management personnel of the automatic feeding mixing station.

　　運輸車輛管理部門和企業對司機的管理培訓不到位，對新招聘的混凝土自動上料攪拌車沒有需求。司機沒有設置嚴格的門檻，沒有進行嚴格的培訓，導致司機素質參差不齊。大多數司機在不熟悉其特點的情況下采取駕駛位置，或根據駕駛其他車輛的習慣自動駕駛混凝土，這大大增加了自動上料攪拌機發生事故的概率。

　　Transport vehicle management departments and enterprises to the driver's management training is not in place, there is no demand for the new recruitment of automatic concrete loading mixing truck. Drivers did not set strict threshold, did not carry out strict training, resulting in uneven quality of drivers. Most drivers take the driving position when they are not familiar with its characteristics, or drive the concrete automatically according to the habits of driving other vehicles, which greatly increases the probability of accidents occurring in the automatic feeding mixer.

　　全自動攪拌車會發生交通事故的原因并不是一點兩點能說得清的，總之需要綜合進行改進，安全不是小問題，需要多上心。更多內容就來這里www.www.boy7up.cn了解吧。

　　The cause of traffic accidents can not be explained at one point or two points. In short, comprehensive improvement is needed. Safety is not a small problem, and more attention is needed. Learn more here at www.www.boy7up.cn.