<address id="913f9"></address>

      <noframes id="913f9"><form id="913f9"><th id="913f9"></th></form>

      <address id="913f9"><address id="913f9"><nobr id="913f9"></nobr></address></address>
      <address id="913f9"><form id="913f9"><nobr id="913f9"></nobr></form></address>

      <address id="913f9"><dfn id="913f9"><listing id="913f9"></listing></dfn></address>
        <address id="913f9"><listing id="913f9"><meter id="913f9"></meter></listing></address>
        <noframes id="913f9"><form id="913f9"><nobr id="913f9"></nobr></form>

        <address id="913f9"></address>

        全國咨詢熱線

        400-879-1999

        點擊撥打服務熱線:400-879-1999
        你所在位置: 首頁 >> 新聞中心 > 行業資訊

        行業資訊

        攪拌車施工需要注意什么?

        作者:http://www.www.boy7up.cn 時間:2021-12-27

        自上料攪拌車操作簡單,儀表盤簡單明了,座椅設置舒適,操作手柄開關設計合理方便,駕駛感受良好。輸送混凝土時,車身行進平穩。有2方,2.5方,3方,四方不等。價格合理,靈活耐用。
        The self loading mixer has simple operation, simple and clear instrument panel, comfortable seat setting, reasonable and convenient design of operating handle switch and good driving experience. When transporting concrete, the vehicle body moves smoothly. There are 2 parties, 2.5 parties, 3 parties and four parties. Reasonable price, flexible and durable.
        接下來看看自動上料攪拌車施工需要注意的細節:
        Next, let's take a look at the details that should be paid attention to in the construction of automatic feeding mixer truck:
        1、操作人員必須持證上崗,禁止將自動上料攪拌車交給無證人員操作,作業時應集中精力,正確操作,不得擅自離崗。
        1. Operators must work with certificates. It is forbidden to hand over the automatic feeding mixer to unlicensed personnel for operation. During operation, they should concentrate on correct operation and shall not leave their posts without authorization.
        全自動攪拌車
        2、作業前應檢查自動上料攪拌車的固定、離合器、制動器、滑輪、鋼絲繩、傳動裝置、上料斗限位、電氣線路、保護接零或接地線等,如有異常必須排除。
        2. Before operation, check the fixing, clutch, brake, pulley, steel wire rope, transmission device, hopper limit, electrical circuit, protective neutral connection or grounding wire of the automatic feeding mixer. If there is any abnormality, it must be eliminated.
        3、實行多班作業時,應執行交接班制度,交班人應認真填寫交班記錄,接班人對提升機檢查確認無誤并簽字后,方可進行工作。
        3. When multi shift operation is implemented, the shift handover system shall be implemented. The shift handover person shall carefully fill in the shift handover record. The work can be carried out only after the successor checks and confirms the hoist and signs it.
        4、必須按規定的技術性能合理使用自動上料攪拌車。
        4. The automatic feeding mixer must be used reasonably according to the specified technical performance.
        5、自動上料攪拌車升起上料斗后,料斗下方嚴禁人員進入,清理料斗下方時,必須掛上保險鏈,自動上料攪拌車攪拌桶內有人進入清理和維修作業時,應拉下開關箱內的隔離開關,鎖好開關箱,以免誤操作傷人。
        5. After the automatic feeding mixer raises the hopper, no personnel are allowed to enter under the hopper. When cleaning the hopper, a safety chain must be hung. When someone enters the mixing drum of the automatic feeding mixer, pull down the isolation switch in the switch box and lock the switch box to avoid personal injury by misoperation.
        6、自動上料攪拌車作業完畢,應將自動上料攪拌車清理干凈,切斷電源,鎖好開關箱。
        6. After the operation of the automatic feeding mixer truck is completed, clean the automatic feeding mixer truck, cut off the power supply and lock the switch box.
        以上就是全自動攪拌車給大家分享的主要內容,更多的精彩內容請大家繼續關注我們:http://www.www.boy7up.cn
        The above are the main contents shared by the automatic mixer. Please continue to pay attention to us for more wonderful contents: http://www.www.boy7up.cn
        新聞中心
        聯系我們
        • 公司:萊州聚峰機械有限公司
        • 熱線:400-879-1999
        • 地址:山東省萊州市206國道與308省道交叉口東南50米

        截屏,微信識別二維碼

        国语对白在线视频