自上料攪拌車的根本結構主要包含取力器、攪拌筒前后支架、減速機、液壓系統、操作組織、清洗系統等。下面小編就來詳細的介紹一下。
The basic structure of self-feeding mixing truck mainly includes power take-off, front and rear support of mixing drum, reducer, hydraulic system, operation organization, cleaning system, etc. Let's introduce it in detail.
1、取力設備
1. Power take-off equipment
自上料攪拌車選用主車建議機取力辦法。取力設備的作用是通過操作取力開關將建議機動力取出,經液壓系統驅動攪拌筒,攪抖筒在進料和運送過程中正向旋轉,以利于進料和對混凝土進行攪拌,在出料時反向旋轉,在作業結束后堵截與建議機的動力聯接。
The main truck is recommended for the self-feeding mixer truck. The function of the power take-off equipment is to take out the power of the proposed machine by operating the power take-off switch, and drive the mixing drum through the hydraulic system. The mixing drum rotates in a positive direction during the feeding and transportation process, so as to facilitate the feeding and mixing of concrete, and rotates in a reverse direction during the discharging, and blocks the power connection with the proposed machine after the operation.
2、液壓系統
2. Hydraulic system
將經取力器取出的建議機動力(一般都是后置全功能取力器),轉化為液壓能(排量和壓力),再經馬達輸出為機械能(轉速和扭矩),為攪拌筒轉動供給動力。
The recommended machine power taken out by the power take-off (generally the rear full-function power take-off) is converted into hydraulic energy (displacement and pressure), and then output into mechanical energy (speed and torque) through the motor to provide power for the rotation of the mixing drum.

3、減速機
3. Reducer
將液壓系統中馬達輸出的轉速減速后,傳給自上料攪拌車攪拌筒。
Reduce the speed output by the motor in the hydraulic system and then transmit it to the mixing drum of the self-feeding mixer.
4、操作組織
4. Operation organization
1)控制攪拌筒旋轉方向,使之在進料和運送過程中正向旋轉,出料時反向旋轉。
1) Control the rotation direction of the mixing drum to make it rotate in a positive direction during feeding and transportation, and rotate in a reverse direction during discharging.
2)控制攪拌筒的轉速。
2) Control the speed of mixing drum.
5、清洗系統
5. Cleaning system
清洗系統的首要作用是清洗攪拌筒,有時也用于運送途中進行干料攪拌。清洗系統還對液壓系統起冷卻作用。
The primary function of the cleaning system is to clean the mixing drum, and sometimes it is also used for dry material mixing during transportation. The cleaning system also cools the hydraulic system.
6、封閉設備
6. Enclosed equipment
全封閉設備選用反轉密封技能,密封了攪拌車的進出料口,處理了傳統攪拌車水份蒸發、砂漿分層、砼料撒落、行車安全等系列問題。
The fully enclosed equipment adopts the reverse sealing technology, which seals the inlet and outlet of the mixer truck, and solves a series of problems such as water evaporation of the traditional mixer truck, mortar layering, concrete scattering, and driving safety.
Since the analysis of the six basic structures of the loading mixer truck has come to an end, you should regularly check and maintain it in normal use to extend its service life. Come to our website for more relevant matters http://www.www.boy7up.cn consulting service