<address id="913f9"></address>

      <noframes id="913f9"><form id="913f9"><th id="913f9"></th></form>

      <address id="913f9"><address id="913f9"><nobr id="913f9"></nobr></address></address>
      <address id="913f9"><form id="913f9"><nobr id="913f9"></nobr></form></address>

      <address id="913f9"><dfn id="913f9"><listing id="913f9"></listing></dfn></address>
        <address id="913f9"><listing id="913f9"><meter id="913f9"></meter></listing></address>
        <noframes id="913f9"><form id="913f9"><nobr id="913f9"></nobr></form>

        <address id="913f9"></address>

        全國咨詢熱線

        400-879-1999

        點擊撥打服務熱線:400-879-1999
        你所在位置: 首頁 >> 新聞中心 > 常見問題

        常見問題

        上料攪拌車減震器漏油的原因

        作者:http://www.www.boy7up.cn 時間:2022-09-30

        只要駕駛過自動上料攪拌車的老司機應該都懂得,自動上料攪拌車操作不當會引起漏油,而漏油常見的就是減震器出現了問題,下面廠家就來為您講講上料攪拌車減震器漏油的原因。
        As long as the old driver who has driven the automatic feeding mixer knows, improper operation of the automatic feeding mixer will cause oil leakage, and the common problem of oil leakage is that the shock absorber has problems. The following manufacturer will tell you about the causes of oil leakage of the shock absorber of the feeding mixer.
        一:在駕駛的過程中很少去檢查保養,施工完后沒有及時清潔,時間久了各種殘留物鐵屑等會增加油封損壞;
        1: During the driving process, they seldom go for inspection and maintenance. After construction, they are not cleaned in time. Over time, various residues such as iron filings will increase the damage of the oil seal;
        二:施工的時候場地比較復雜,施工超負荷等,比如水泥沙子進入油封沒有及時清理;
        2: During construction, the site was quite complex and the construction was overloaded. For example, cement and sand entered the oil seal and were not cleaned in time;
        自動上料攪拌車
        三:自動上料攪拌車駕駛的時間比較久,減震器一直油封一直沒有更換或者保養過,時間長了會老化,密封功能減低。
        3: The automatic feeding mixer has been driving for a long time. The oil seal of the shock absorber has not been replaced or maintained. It will age and the sealing function will be reduced after a long time.
        四:生產廠家在噴底盤裝甲的時候,減震器沒有密封好或者處理不好,裝甲在減震器活塞桿上會造成油封磨損帶來的漏油,所以,在選購自動上料攪拌車的時候要看好廠家;
        4: When the manufacturer sprays chassis armor, the shock absorber is not properly sealed or handled. The armor on the piston rod of the shock absorber will cause oil leakage due to oil seal wear. Therefore, the manufacturer should be careful when purchasing automatic feeding mixer;
        五:駕駛的過程中,經常檢查活塞運動的支桿是否嚴密,如果密封不嚴,也會漏油。
        5: During driving, always check whether the supporting rod of the piston movement is tight. If the sealing is not tight, oil will leak.
        一般是這六大原因,只要懂得,平時都會自行檢修,也會注重保養。更多注意事項就來我們網站http://www.www.boy7up.cn進行咨詢吧,有關人員為您服務!
        Generally, these six reasons are the main reasons. As long as you understand them, you will always carry out self maintenance and pay attention to maintenance. More notes on our website http://www.www.boy7up.cn Please consult and the relevant personnel will serve you!
        新聞中心
        聯系我們
        • 公司:萊州聚峰機械有限公司
        • 熱線:400-879-1999
        • 地址:山東省萊州市206國道與308省道交叉口東南50米

        截屏,微信識別二維碼

        国语对白在线视频