全自動攪拌車是建筑行業必不可少的使用機械，水泥砂石的攪拌都需要他，全自動攪拌車有好多種類，如全自動攪拌車、移動式全自動攪拌車等，那么它們工作時有什么注意事項？

Full automatic mixer is an indispensable machine in the construction industry. It is required to mix cement sand and gravel. There are many types of full automatic mixer, such as full automatic mixer, mobile full automatic mixer, etc. What are the precautions when they work?

一、全自動攪拌車啟動后，應使攪拌筒達到正常轉速后進行上料，上料后要及時加水。添加新料須先將攪拌機內原有的混凝土全部卸出后才能進行。不得中途停機或滿載荷時起動攪拌機，反轉出料者除外。

1、 After the automatic mixer truck is started, the mixing drum shall be fed when it reaches the normal speed, and water shall be added in time after feeding. Add new materials only after all the original concrete in the mixer is discharged. It is not allowed to stop the mixer midway or start the mixer when it is fully loaded, except for reverse discharging.

全自動攪拌車使用過程中切勿使砂石落入機器運轉部分中去，以免使運轉部件卡住損壞。料斗提升后，斗下不能有人通過或停留，以免制動器失靈發生意外事故。斗下檢修或進行清理工作時，強行停機并將上料斗用保險鏈條拉牢。

During the use of the automatic mixer, do not let the sand and gravel fall into the running part of the machine, so as to prevent the running parts from being stuck and damaged. After the hopper is lifted, no one can pass or stay under the hopper to avoid accidents due to brake failure. When overhauling or cleaning under the hopper, stop the hopper by force and fasten the upper hopper with a safety chain.

二、全自動攪拌車完成作業后應對攪拌機進行清洗，操作人員如需要進入筒內清洗時，須切斷電源，設專人在外監護，或卸去熔斷器并鎖好電閘箱，然后方可進入。

2、 After the completion of the operation of the fully automatic mixer, the mixer shall be cleaned. If the operator needs to enter the cylinder for cleaning, he/she must cut off the power supply, assign a special person to monitor outside, or remove the fuse and lock the switch box before entering.

全自動攪拌車上料斗的搖把，應用銷子固定，以免人進入簡內清理時，身體碰觸搖把使料斗提升，發生擠壓事故。全自動攪拌車在工作中若發現故障不能繼續運轉時，應立即切斷電源，將攪拌筒內的混凝土清除干凈，然后進行檢修。

The handle of the hopper on the fully automatic mixer shall be fixed with a pin to prevent the hopper from being lifted by touching the handle when people enter the cylinder for cleaning. If the automatic mixer cannot continue to operate in case of any fault during operation, the power supply shall be cut off immediately, the concrete in the mixing drum shall be cleaned, and then maintenance shall be carried out.

三、行駛過程中，加長溜槽一定要放在卸料溜槽的支架上。之所以一定要將加長溜槽放在支架的位置，是因為放在那里能將它更好固定住。如果固定不嚴謹的話，很有可能會在行駛中，對其他車輛或者路人造成傷害。所以為了保障自己安全和他人安全，將其放在卸料溜槽的支架上。

3、 During driving, the extended chute must be placed on the support of the discharge chute. The reason why the extended chute must be placed on the support is that it can be better fixed there. If the fixing is not strict, it is likely to cause damage to other vehicles or passers-by during driving. Therefore, in order to ensure their own safety and the safety of others, they are placed on the support of the discharge chute.

全自動攪拌車工作中應該注意的事項有哪些呢？在此講解了三方面的內容，您有什么不了解的地方或者有怎樣的需求，隨時來我們網站http://www.www.boy7up.cn進行咨詢！

What should be paid attention to in the work of automatic mixer? Three aspects are explained here. If you don't know anything or have any needs, please come to our website at any time http://www.www.boy7up.cn Consult!