任何機械設備都會在使用中出現零件的磨損，這是常事，那么我們要做的就是出現問題時要及時進行處理，防止更大的磨損出現，那么小型攪拌車零件磨損處理要注意什么？

　　Any mechanical equipment will wear parts in use, which is common, so what we need to do is to deal with problems in time to prevent greater wear, so what should be paid attention to in the wear treatment of small mixing truck parts?

　　小型攪拌車的設備部件保持合理的溫度。在運行中，每個部件的溫度都有自己的正常范圍。溫度過高或過低都會影響零件的強度，所以有必要用冷卻液和潤滑油控制某些零件的溫度，使其工作在合理的溫度范圍內。

　　The equipment parts of the small mixer are kept at a reasonable temperature. During operation, each component has its own normal temperature range. Too high or too low temperature will affect the strength of parts, so it is necessary to control the temperature of some parts with coolant and lubricating oil, so that they work within a reasonable temperature range.

　　及時清洗，減少機械雜質對設備的影響。機械雜質一般是指工程機械在使用過程中產生的灰塵、泥土等物質和一些金屬屑、油脂等。一旦這些雜質到達機器的工作面之間，危害是非常大的：不僅摩擦會增加，而且油耗也會增加。并且會破壞潤滑油膜，劃傷配合面。

　　Timely cleaning, reduce the impact of mechanical impurities on equipment. Mechanical impurities generally refer to dust, soil and other substances and some metal chips, grease and so on generated during the use of construction machinery. Once these impurities get between the working surfaces of the machine, they can be very harmful: not only will friction increase, but fuel consumption will also increase. And will destroy the lubricating oil film, scratch the mating surface.

　　防止小型攪拌車零件腐蝕。腐蝕作用于零件，有時不易被發現，易被忽視，危害更大。雨水、空氣中的化學物質等通過機械零件的管道和縫隙滲入機械，腐蝕零件。腐蝕零件的繼續工作也會加速機械磨損并增加機械故障。這就要求管理人員和操作人員根據當時當地的天氣情況和現場情況，采取合理的施工安排，將化學腐蝕對機械零件的危害降到最低。

　　Prevent corrosion of small agitator parts. Corrosion on parts, sometimes not easy to be found, easy to be ignored, more harm. Rainwater, chemicals in the air and so on penetrate the machinery through the pipes and cracks of the machinery parts, corroding the parts. Continued operation of corroded parts can also accelerate mechanical wear and increase mechanical failure. This requires managers and operators to take reasonable construction arrangements according to the local weather conditions and site conditions, to minimize the harm of chemical corrosion on mechanical parts.

　　很多機械設備在故障之初都是由零件磨損引起的，小型攪拌車在運行過程中也是如此。因此，在使用過程中減少了設備部件的磨損，有效避免了機械設備在使用過程中的故障。更多內容就來www.www.boy7up.cn咨詢吧。

　　Many mechanical equipment at the beginning of the failure is caused by the wear of parts, small mixer in the process of operation is the same. Therefore, in the process of use to reduce the wear of equipment parts, effectively avoid the mechanical equipment in the process of use. For more information, visit www.www.boy7up.cn.