1. If the painted surface of 3.0 m3 automatic feeding mixer is not used for care, the metal coating will produce very small cracks and continue to penetrate the coating until it penetrates the whole coating. If the cracks contain wax, stripes will appear on the body. Regular waxing will gradually reduce cracks.

2.當暴露在陽光下的紫外線時，3.0方自動上料攪拌車會蒸發并保護空氣中的油，隨著時間的推移，油漆會過度分散。涂料表面的亮度和深度大大降低，涂料表面逐漸變白，形成氧化層，縮短涂料壽命。如果3.0方自動上料攪拌車的油漆表面被嚴重氧化，可以通過研磨和拋光加工。

2. When exposed to ultraviolet rays in the sun, the 3.0m3 automatic feeding mixer will evaporate and protect the oil in the air. Over time, the paint will be excessively dispersed. The brightness and depth of the coating surface are greatly reduced, the coating surface gradually turns white, forms an oxide layer, and shortens the service life of the coating. If the paint surface of 3.0 m3 automatic feeding mixer is seriously oxidized, it can be processed by grinding and polishing.

3.由于3.0方自動上料攪拌車而發生表面磨損。昆蟲，鳥糞，樹液，焦油和瀝青可能是原因。一些小的蝕刻可以通過研磨和拋光來解決。

3. Surface wear due to 3.0m3 automatic feeding mixer. Insects, bird droppings, tree sap, tar and asphalt may be the cause. Some small etching can be solved by grinding and polishing.

除了上述方法之外，為了有效地防止油漆飛濺在車輛上，在駕駛車輛時必須注意駕駛并避免碰撞和摩擦。否則，將發生其他損壞

In addition to the above methods, in order to effectively prevent paint splashing on the vehicle, you must pay attention to driving and avoid collision and friction when driving the vehicle. Otherwise, other damage will occur

選擇3.0方自動上料攪拌車的注意事項

Precautions for selecting 3.0 m3 automatic feeding mixer

1.油箱容量選擇：3.0方自動上料攪拌車在購買時需要注意小巧方便的外觀。當然，您需要根據需要購買，并且有10,12和14個派對。確定音量。

1. Selection of oil tank capacity: 3.0m3 automatic feeding mixer needs to pay attention to its compact and convenient appearance when purchasing. Of course, you need to buy as needed, and there are 10, 12 and 14 parties. Determine the volume.

2.判斷3.0方自動上料攪拌車罐體的質量：罐體的質量主要是指罐體的厚度。目前一般5mm厚的錳板，業主可以向廠家詢問罐體厚度，如果厚度小于5mm，則不需要考慮。

2. Judge the quality of the tank of the 3.0m3 automatic feeding mixer truck: the quality of the tank mainly refers to the thickness of the tank. At present, the owner can ask the manufacturer about the thickness of the tank for the manganese plate with a thickness of 5mm. If the thickness is less than 5mm, it does not need to be considered.

3.根據運行良好的道路狀況：購買3.0方自動上料攪拌車時，需要根據使用情況設置基座。如果跑道非常平坦，通常是道路。性能。

3. According to the road conditions in good operation: when purchasing the 3.0m3 automatic feeding mixer, the base shall be set according to the use conditions. If the runway is very flat, it is usually a road. Performance.

3.0方自動上料攪拌車在選擇時需要遵循正確的標準，了解制造商的生產規則并能夠購買正確的車輛。在選擇設備的過程中，我們希望您能夠根據以上知識做出合理的選擇。

3.0 Party A's automatic loading mixer shall follow the correct standards when selecting, understand the manufacturer's production rules and be able to purchase the correct vehicles. In the process of selecting equipment, we hope you can make a reasonable choice based on the above knowledge.

以上的精彩內容來自：萊州中科聚峰機械有限公司自動上料攪拌車產品的介紹及分享，更多內容請繼續關注我們：http://www.www.boy7up.cn

The above wonderful content comes from the introduction and sharing of automatic feeding mixer products of Laizhou Zhongke Jufeng Machinery Co., Ltd. please continue to pay attention to us for more content: http://www.www.boy7up.cn