一、啟動前應對機械系統各部位認真進行檢查，確認良好后方可啟動。
1、 Before starting, all parts of the mechanical system should be carefully checked, and the machine can be started only after it is confirmed to be in good condition.
二、啟動前，應將攪拌操縱桿放在“空檔”位置。
2、 Before starting, put the mixing control lever in the "neutral" position.
三、啟動后，應將攪拌操縱桿放在“卸料”位置，放去筒內積水。
3、 After starting, the mixing control rod should be placed in the "discharge" position to remove the water in the cylinder.
四、裝料時，攪拌操作桿應放在“裝料”位置。
4、 When loading, the mixing operating rod should be placed in the "loading" position.
五、運輸前，卸料槽必須固定在“行駛”位置，防止擺動。
5、 Before transportation, the discharge chute must be fixed in the "driving" position to prevent swing.

六、操作操縱桿時，應在“空檔”位置稍作停留后方可動至下一個位置。
6、 When operating the control lever, stop at the "neutral" position for a while before moving to the next position.
七、搞好文明施工，桶內多余材料不準隨便亂倒。卸料后必須對攪拌筒、料槽、托輥等部位進行清洗。
7、 Do a good job in civilized construction, and do not dump the surplus materials in the barrel. After discharging, the mixing drum, material trough, idler and other parts must be cleaned.
八、人進入筒內清除砼結塊時，應將車輛熄火，拔下電門鑰匙，筒外設人監護。
8、 When people enter the cylinder to remove the concrete lumps, they should turn off the vehicle, pull out the switch key, and set people outside the cylinder to monitor.
攪拌車是一種特殊車輛，并不是所有會開車的司機都會開攪拌車，如果操作不當會引起翻車、液壓泵、馬達、減速機過快磨損甚至出現嚴重后果。
Mixer is a kind of special vehicle, not all drivers who can drive will drive mixer, if the operation is improper, it will cause rollover, hydraulic pump, motor, reducer too fast wear and even serious consequences.
購買產品重要的是質量，選擇商家選擇是誠信，全自動攪拌車真誠的為廣大客戶提供優良的服務，歡迎大家在網站：http://www.www.boy7up.cn下方留言咨詢.
The most important thing to buy products is quality. Choosing merchants is honesty. Automatic mixer sincerely provides excellent service for customers. Welcome to visit our website: http://www.www.boy7up.cn Below message consultation