一、開啟前應該對機械系統各部位仔細做好查驗，確定良好后才可開啟。
1、 Before opening, all parts of the mechanical system should be carefully checked, and can be opened only after they are confirmed to be in good condition.
二、開啟前，應將攪拌操縱桿放到“空檔”部位。
2、 Before opening, put the mixing control lever in the "neutral" position.
三、開啟后，應將攪拌操縱桿放到“卸料”部位，放去筒內積水。
3、 After opening, the mixing control rod should be placed at the "discharge" position to remove the water in the cylinder.
四、裝料時，攪拌操作桿應放到“裝料”部位。
4、 When loading, the mixing operating rod should be placed at the "loading" position.
五、運送前，卸料槽必需穩定在“行駛”部位，避免 擺動。
5、 Before transportation, the discharge chute must be stable in the "driving" position to avoid swing.

六、操作操縱桿時，應在“空檔”部位稍作滯留后才可動至下一個部位。
6、 When operating the control lever, it should be slightly detained in the "neutral" position before moving to the next position.
七、做好文明施工，桶內多出材料禁止隨意亂倒。卸料后必需對攪拌筒、料槽、托輥等部位做好清理。
7、 Do a good job in civilized construction, and don't pour materials randomly. After discharging, the mixing drum, material trough, idler and other parts must be cleaned.
八、人進到筒內清除砼結塊時，應將車子熄火，拔掉電門鑰匙，筒外設人監測。
8、 When people enter the cylinder to remove concrete lumps, they should turn off the car, pull out the key of the switch, and set people outside the cylinder to monitor.