In order to improve the reliability of the braking system of the automatic feeding mixer truck, it is recommended to improve the following parts of the braking system of the automatic feeding mixer truck:,

（1）自動上料攪拌車制動氣壓管路由單管路變為雙管路，以提高安全系數。,

(1) The brake air pressure pipe of automatic feeding mixer truck is changed from single pipe to double pipe to improve the safety factor.,

（2）增加空壓機到組合閥的鐵管長度，采用多個U形排列，以增強輸出空氣的冷卻效果，裝載機減輕組合閥橡膠密封件的老化。

(2) Increase the length of the iron pipe from the air compressor to the combination valve, and adopt multiple U-shaped arrangement to enhance the cooling effect of the output air, and the loader reduces the aging of the rubber seal of the combination valve.

（3）采用帶干燥器的調壓器替換現在使用的組合閥，自動上料攪拌車損壞后的維修策略以減少儲氣罐的積水。

(3) The pressure regulator with dryer is used to replace the combination valve currently used, and the maintenance strategy after the automatic feeding mixer is damaged is adopted to reduce the ponding in the air storage tank.

（4）自動上料攪拌車在氣頂油制動系統中，加力器是非常關鍵的部件，對其儲液罐應加裝報警裝置。可以采用以下兩種結構：采用液位報警，使用浮子和舌簧開關以檢測制動液液面的高低，適時報警；采用行程報警，若加力器活塞行程太大，說明制動系統有故障。,

(4) In the air top oil braking system of automatic feeding mixer truck, the booster is a very key component, and the liquid storage tank shall be equipped with an alarm device. The following two structures can be adopted: liquid level alarm, float and tongue spring switch to detect the level of brake fluid and alarm in time; travel alarm. If the stroke of booster piston is too large, it indicates that the braking system is faulty. ,

（5）采用帶干燥器的調壓器替換現在使用的組合閥，以減少儲氣罐的積水。

(5) The pressure regulator with dryer is used to replace the combination valve now in use to reduce the water accumulation in the air tank.

我們一直在堅持分享的路上自上料攪拌車廠家http://www.www.boy7up.cn真正為您解決您所需要的問題.

We have been insisting on sharing on the road from the charging mixer manufacturer http://www.www.boy7up.cn Truly solve the problems you need