<address id="913f9"></address>

      <noframes id="913f9"><form id="913f9"><th id="913f9"></th></form>

      <address id="913f9"><address id="913f9"><nobr id="913f9"></nobr></address></address>
      <address id="913f9"><form id="913f9"><nobr id="913f9"></nobr></form></address>

      <address id="913f9"><dfn id="913f9"><listing id="913f9"></listing></dfn></address>
        <address id="913f9"><listing id="913f9"><meter id="913f9"></meter></listing></address>
        <noframes id="913f9"><form id="913f9"><nobr id="913f9"></nobr></form>

        <address id="913f9"></address>

        全國咨詢熱線

        400-879-1999

        點擊撥打服務熱線:400-879-1999
        你所在位置: 首頁 >> 新聞中心 > 公司新聞

        公司新聞

        自上料攪拌車真誠為企業增加實用性

        作者:http://www.www.boy7up.cn 時間:2021-06-15

        裝載:基于獨特的鉸鏈式液壓鏟,能夠輕松準確地裝載配料;鏟斗內置的刀片可以自動切割開水泥袋避免原料浪費;所有配料可從鏟斗上順暢快速地進入攪拌筒內。
        Loading: Based on the unique hinged hydraulic shovel, it can load ingredients easily and accurately; The blade inside the bucket can automatically cut the cement bag to avoid the waste of raw materials; All ingredients can enter the mixing drum smoothly and quickly from the bucket.
        攪拌:骨料和水泥進入攪拌筒之后,可通過雙水桶中的自動加壓的水流進行混合。有的雙螺葉保證了攪拌質量及混凝土質量,配電子稱重系統。
        Mixing: after the aggregate and cement enter the mixing drum, they can be mixed by the automatic pressurized water flow in the double bucket. Some double screw blades ensure the mixing quality and concrete quality, with electronic weighing system.
        運送:四輪驅動底盤,全液壓傳動裝置,適應各種復雜地形,滿載時可上30°坡。
        Transportation: four wheel drive chassis, full hydraulic transmission device, adapt to various complex terrain, full load can be up to 30 ° Slope.
        自上料攪拌車
        卸料:操作者利用操作桿通過270°回轉攪拌桶,在車輛周圍2m高度傾倒混凝土。
        Unloading: the operator uses the operating rod to pass through 270 ° Rotate the mixing drum and dump the concrete at a height of 2m around the vehicle.
        操作:設有設備齊全的駕駛室,配有根據人機工程學原理設計的先導操作桿,司機通過一根手柄就能控制所有主要作業動作。
        Operation: equipped with a fully equipped cab, equipped with a pilot operating rod designed according to ergonomics principles, the driver can control all the main operations through a handle.
        配備了防翻滾-防墜物保護系統,以便設備在惡劣環境下為司機提高的保護。
        It is equipped with anti roll and anti falling object protection system, so that the equipment can improve the protection of the driver in harsh environment.
        自動上料攪拌車采用輪邊減速器,采用輪邊減速器可滿足在總傳動比相同的條件下,使變速器、傳動軸、主減速器、差速器、半軸等部件的載荷減少,尺寸變小以及使驅動橋獲得較大的離地間隙等優點,它被廣泛應用于載重貨車、大型攪拌車、越野汽車及其他一些大型工礦用車。因此對輪邊減速器的研究,具有很重要的實際意義和企業實用性。
        Automatic feeding mixer adopts wheel reducer, which can reduce the load of transmission, transmission shaft, main reducer, differential, half shaft and other parts, reduce the size, and make the drive axle get larger ground clearance under the condition of the same total transmission ratio. It is widely used in truck, large mixer, truck and truck Off road vehicles and other large industrial and mining vehicles. Therefore, the research of wheel reducer has very important practical significance and enterprise practicability.
        新聞中心
        聯系我們
        • 公司:萊州聚峰機械有限公司
        • 熱線:400-879-1999
        • 地址:山東省萊州市206國道與308省道交叉口東南50米

        截屏,微信識別二維碼

        国语对白在线视频