自動上料攪拌機基本結構主要包括取器、攪拌筒前后支架、減速機、液壓系統、攪拌筒、操縱機構、清洗系統等。其工作原理：通過取裝置將汽車底盤的動取出，并驅動液壓系統的變量泵，把機械能轉化為液壓能傳給定量馬達，馬達再驅動減速機，由減速機驅動攪拌裝置，對混凝土進行攪拌。
The basic structure of automatic feeding mixer mainly includes extractor, front and rear supports of mixing drum, reducer, hydraulic system, mixing drum, operating mechanism, cleaning system, etc. Its working principle: take out the chassis of the car through the take out device, drive the variable pump of the hydraulic system, transfer the mechanical energy into hydraulic energy to the quantitative motor, the motor drives the reducer, and the reducer drives the mixing device to mix the concrete.
效率生產、節能生產一直各大企業比較重視的問題，在使用時節油的問題也受到部分客戶的重點關注，小編來給大家分享一些省油的小技巧：
Efficient production and energy-saving production have always been the problems that major enterprises attach great importance to, and the problem of oil in use has also been the focus of some customers
一、車輛起步
1、 Vehicle start
車輛在起步時，可以大油門，充分發揮發動機的性能，讓攪拌車以快的時間達到巡航車速，這樣駕駛可以達到節油的目的。
At the beginning of the vehicle, you can throttle, give full play to the performance of the engine, so that the mixer can reach the cruising speed in a fast time, so that driving can achieve the purpose of fuel saving.

二、平路行駛
2、 Driving on a level road
1、平路行駛時，盡量在一條車道上行駛，減少來回變換車道的情況發生，有利于節油。
1. When driving on a flat road, try to drive in one lane to reduce the occurrence of lane changing back and forth, which is conducive to fuel saving.
2、如果與其他車輛結伴而行，切勿采用跟車的方式，可以各自行駛，約定好相聚點。往往在后面跟車的車輛油耗會高于前車。
2. If you travel with other vehicles, do not follow them. You can drive separately and make a meeting point. Often, the fuel consumption of the car following will be higher than that of the car in front.
自動上料攪拌機
Automatic feeding mixer
3、控制好發動機轉速，不同發動機，控制轉速不一致。
3. Control engine speed, different engine, control speed is not consistent.
4、在平路行駛時，盡量保持油門開度的穩定，油門在30左右即可，切忌油門忽高忽低。
4. When driving on a level road, try to keep the opening of the throttle stable. The throttle can be around 30. Avoid high and low throttle.
三、車輛爬坡
3、 Vehicle climbing
1、攪拌車在爬坡的時候，堅持小坡沖，大坡穩的原則。
1. Mixing truck in climbing, adhere to the principle of small slope, big slope stability.
2、坡度小路段的時候可以采用沖坡的方式，車輛提前加速，讓車輛具有足夠的慣性行駛到坡頂。
2. When the slope is small, we can use the way of slope, the vehicle accelerates in advance, so that the vehicle has enough inertia to drive to the top of the slope.
4、在車輛即將到達坡頂時，如果前方是下坡，可以減小油門開度，利用車輛的慣性到達坡頂，切勿在即將到達坡頂時增擋，這時完全可以利用下坡的慣性進行增速，減少不必要的燃油消耗。
4. When the vehicle is about to reach the top of the slope, if the front is downhill, you can reduce the throttle opening and use the inertia of the vehicle to reach the top of the slope. Do not increase the gear when you are about to reach the top of the slope. At this time, you can use the inertia of the downhill to increase the speed and reduce unnecessary fuel consumption.
有了自上料攪拌車上面的小總結，希望對廣大客戶有所幫助，如果有什么不理解的或者尋求幫助的請點擊我們的網站：http://www.www.boy7up.cn或者來電咨詢，我們會盡全力為您解決
With the summary of self feeding mixer, I hope it can be helpful to our customers. If there is anything you don't understand or ask for help, please click our website: http://www.www.boy7up.cn Or call consultation, we will try our best to solve for you